Piscimar Algibon PM-614 is a liquid, non-foaming multi-purpose algaecide for pools, designed to help prevent algae growth and keep water clearer, bluer and brighter throughout the swimming season. Its foam-free formula makes it easy to use as part of a regular maintenance routine without affecting water transparency.
What is Piscimar Algibon PM-614
Piscimar Algibon PM-614 is a maintenance algaecide formulated to help keep algae under control and maintain better water clarity across the swimming season.
The foam-free formula increases water transparency, helps repel insects from the surface, and contributes to that clean, vivid blue colour that makes a pool genuinely inviting. The result is simpler maintenance and a more enjoyable swim.
It suits anyone looking for a straightforward monthly routine – one application per month, no disruption to your usual water treatment programme.
Available in 1l and 5l formats, it scales equally well from a small domestic pool to larger commercial or public facilities.
Algae in your pool: how Algibon supports regular maintenance
Algae problems rarely announce themselves dramatically. More often, the first signs are subtle – water that looks slightly duller, a blue that has lost its edge, or transparency that just isn’t quite right.
Warm weather, heavy bather load and under-filtration can accelerate these early signs into a full-blown green pool surprisingly quickly. Preventive maintenance is far easier than remedial treatment, and that is exactly where Piscimar Algibon PM-614 fits in.
Used consistently, it reinforces your maintenance routine by controlling algae development and helping to sustain clear, bright, blue water from May through to September – and beyond if your pool stays open.
Dosage and application guide for Piscimar Algibon
For Piscimar Algibon PM-614 to work effectively, water chemistry must be balanced and the filtration system must be running during application.
Before you apply: check pH and test phosphate levels. pH should sit between 7.2 and 7.6. If phosphates exceed 200 ppb, treat them first with Piscimar PM-625 Phos-Out before adding Algibon.
Step-by-step application
- Test and adjust pH to the 7.2-7.6 range if needed.
- Check phosphate levels – especially if your pool has a history of recurring algae.
- Treat phosphates first if they are above 200 ppb, before applying Algibon.
- Pour Algibon directly into the pool water with the filtration system running.
- Keep filtration running to distribute the product evenly throughout the water.
Recommended dosage
- Initial treatment: 2 L/100 m³ when starting the product for the first time or when the pool needs an algae boost.
- Monthly maintenance (private pools): 1 L/100 m³ once a month.
- Public or commercial pools: 1 L/100 m³ every 15 days.
Important: Algibon helps control algae, improves water transparency and produces no foam – but it does not replace filtration, pH management or your regular water treatment programme.
What to expect after applying Piscimar Algibon
Once Piscimar Algibon PM-614 has been added, keep the filtration running so the product circulates fully through the pool.
In the first few hours: the product integrates into your water treatment, reinforcing protection against algae and helping to maintain that clear, bright blue appearance.
What to look for
- Improved water clarity: Algibon helps enhance transparency as part of your ongoing maintenance.
- Brighter blue colour: contributes to a visually cleaner, more appealing pool.
- No surface foam: correctly applied, it leaves no foam on the water surface.
- More stable maintenance: consistent use helps reduce the risk of algae taking hold.
Important: if water clarity continues to deteriorate or algae keeps returning, check pH, phosphate levels and filtration run times before repeating the treatment.
When to choose Algibon – and when to pick a different treatment
Piscimar Algibon PM-614 is the right choice for regular preventive maintenance – keeping algae at bay, improving water transparency and sustaining a vivid blue colour throughout the season.
It is not the best fit when a pool is already heavily green, visibly cloudy, or has algae clinging to walls and floor. In those situations, a more targeted treatment from the Piscimar range will deliver better results.
Choosing the right product: for salt electrolysis or active oxygen pools, Piscimar Algiklean PM-634 is generally the more suitable option. For black, brown or yellow algae attached to surfaces, Piscimar Algiblack+ PM-624 is specifically designed for that problem.
- Choose Algibon for routine maintenance, algae prevention and clearer, brighter blue water.
- Choose Algiklean for salt electrolysis or active oxygen pools, green water, or when a treatment boost is needed.
- Choose Algiblack+ when black, brown or yellow algae are stuck to walls, floors or grout lines.
Picking the right product from the start avoids wasted effort and gets your water back on track faster.
Why buy Piscimar Algibon from Pools&More
At Pools&More you will find Piscimar Algibon PM-614 backed by a specialist team with deep expertise in pool water treatment and maintenance.
As an official Piscimar distributor, Pools&More gives you the confidence of buying genuine product alongside practical guidance on dosage, pH management, phosphate control and filtration – so you get the results the product is designed to deliver.
Expert support: if you have questions about application or water treatment, the Pools&More team is on hand before and after your purchase.
- Official Piscimar distributor.
- Specialist pool water treatment retailer.
- Advice and support before and after purchase.
Frequently asked questions
What is Piscimar Algibon used for?
Piscimar Algibon PM-614 is a maintenance algaecide for pools. It helps control algae, increases water transparency, contributes to a brighter blue colour and produces no foam.
Is Algibon for preventing algae or treating an existing problem?
Algibon is primarily a preventive maintenance product. It can be used as an initial treatment at the higher dose, but its core role is to stop algae from establishing in the first place during the swimming season.
What is the correct dosage for Piscimar Algibon?
For an initial treatment, use 2 L/100 m³. For ongoing maintenance in private pools, use 1 L/100 m³ once a month. Public or commercial pools should dose at 1 L/100 m³ every 15 days.
How do I apply Algibon to my pool?
Pour the product directly into the pool water while the filtration system is running. Water circulation distributes Algibon evenly, ensuring consistent coverage throughout the pool.
Do I need to check phosphate levels before applying Algibon?
Yes – particularly if your pool has a recurring algae problem. If phosphates are above 200 ppb, treat them with Piscimar Phos-Out first. High phosphates feed algae growth and will reduce the effectiveness of any algaecide.
Does Algibon cause foaming in the pool?
No. Piscimar Algibon PM-614 is specifically formulated to be non-foaming, so regular application will not create visible foam on the water surface – a common concern with some algaecides.
Can I use Algibon in a salt electrolysis pool?
For salt electrolysis pools, Piscimar Algiklean PM-634 is generally the better fit – it is designed to be compatible with salt chlorination systems. Algibon is better suited to conventionally treated pools.
What is the difference between Algibon and Algiklean?
Algibon focuses on regular maintenance, algae prevention, water clarity and bright blue colour. Algiklean is the go-to option for salt electrolysis or active oxygen pools, and is also effective when a pool has already turned green and needs a stronger intervention.
Will Algibon clear a heavily green pool?
Algibon can support algae control, but a heavily green or cloudy pool usually needs pH correction, phosphate treatment, improved filtration and proper disinfection first. Once the water is back in balance, Algibon works well as a preventive maintenance product.
| Weight | N/A |
|---|---|
| algibon | 1L, 5L, 25L |
Be the first to review “Piscimar Algibon”
You must be logged in to post a review.
Related products
Chemical treatment
CTX-550 WinterStar Winterizer
Chemical treatment
Piscimar Goldenflok
Chemical treatment
Piscimar Clean Pool TAB20
Chemical treatment
Piscimar Celnet
Chemical treatment
Analytical strips 3 parameters: free chlorine
Chemical treatment
Piscimar Resticlor
Chemical treatment
Pooltester 5 in 1
Chemical treatment
Reviews
There are no reviews yet.