Aiper X1 Pro Max Cordless Robotic Pool Cleaner

The Aiper X1 Pro Max is a cordless robotic pool cleaner that cleans the floor, walls, waterline and surface in a single unit. Equipped with 9 brushless motors and 8,500 GPH suction (32,000 L/h), it covers in-ground pools up to 300 m². Its 10,400 mAh battery delivers up to 5.5 hours of floor cleaning and up to 10 hours in surface mode. Designed for medium to large pools, it is ideal for anyone who wants a fully autonomous, cable-free solution with app control.

Aiper X1 Pro Max Cordless Robotic Pool Cleaner 9-Motor

Why choose a cordless robotic pool cleaner?

A corded pool cleaner means uncoiling a cable, plugging it in and tidying everything away after every use. With a cordless robotic pool cleaner like the Aiper X1 Pro Max, you simply place it in the water and start cleaning via the app or the physical button. There are no cables getting caught on steps and no limits on reach.

The 5.5-hour runtime on the pool floor is enough for pools up to 300 m². Compared with corded models in the same price bracket, the X1 Pro Max adds surface cleaning, wireless charging and intelligent dirt detection — without sacrificing suction power.

Key features of the Aiper X1 Pro Max

Navigation with 40 ultrasonic sensors and 3D mapping

The OmniSense+ 2.0 system uses 40 ultrasonic sensors with an 8-metre range and 360° coverage to create a three-dimensional map of the pool. It identifies walls, steps, benches and obstacles before plotting the cleaning route.

The FlexiPath 2.0 algorithm adapts the cleaning pattern — S, grid, Y or edge mode — to match the shape of the pool. It also includes automatic supplemental cleaning: it detects missed areas and goes back to finish them. The result is fewer repeated passes and no corners left behind.

8,500 GPH suction with 9 brushless motors

Its 9 brushless motors generate 8,500 GPH suction (32,000 litres per hour) — the highest power available in a cordless robotic pool cleaner. The suction inlet is 3 cm wide, allowing it to pick up leaves, sand, insects and medium-sized debris without clogging.

Four active brushes — two front and two rear — loosen dirt before suctioning. The TVC Engine propulsion system enables 180° rotation and precise multi-directional underwater movement.

4-in-1 cleaning with 8 intelligent modes

The Aiper Scuba X1 Pro Max cleans all four areas of the pool: floor, walls, waterline and surface. It offers 5 automatic modes (Floor, Walls, Waterline, Standard, Eco) and 3 manual modes (Max Power, Surface/Skim, Floor + Wall).

Its intelligent dirt detection automatically adjusts cleaning intensity according to the level of dirt detected. In Eco mode, runtime is extended to maximise coverage. In Max mode, suction runs at 100% for stubborn dirt.

Ultra-fine dual-layer filtration with a 5-litre basket

The dual filtration system combines a 180 µm filter for larger debris with a 3 µm MicroMesh™ filter for dust, algae and microscopic particles. The debris basket has a 5-litre capacity with top access, reducing how often it needs to be emptied.

Wireless charging and automatic recall

The HomeComingDock™ charges the cleaner wirelessly — simply place it on the dock, even while wet. A full charge takes around 4 hours. When the battery is low or the cycle ends, the cleaner automatically rises to the surface. Through the app, you can call the cleaner back at any time.

Water quality monitoring

The Aiper X1 Pro Max includes intelligent water quality monitoring, allowing you to track your pool’s condition directly in the app. This feature complements physical cleaning with useful water-condition data.

Technical specifications of the Aiper X1 Pro Max

Feature	Value
Motors	9 brushless
Suction	8,500 GPH (32,000 L/h)
Sensors	40 ultrasonic (OmniSense+ 2.0)
Battery	10,400 mAh, Lithium-Ion
Runtime (floor)	Up to 330 min (5.5h Eco) / 210 min (3.5h Max)
Runtime (surface)	Up to 600 min (10h Skim)
Charging time	~4 hours (wireless)
Maximum area	300 m² (3,230 sq.ft)
Maximum pool length	30 metres
Filtration	Dual: 180 µm + MicroMesh™ 3 µm
Basket capacity	5 litres
Brushes	4 active (dual front and rear)
Cleaning modes	8 (5 automatic + 3 manual)
Dimensions	50 × 42.8 × 29.8 cm
Weight	~15 kg (dry)
Voltage	100–240V, 50/60Hz
Protection	IPX8
Water temperature	0–40 °C
Maximum salinity	50,000 PPM NaCl
Maximum chlorine	40 PPM
Control	Aiper app (Bluetooth + Wi-Fi)
Navigation	FlexiPath 2.0 + OmniSense+ 2.0
Propulsion	TVC Engine (180° rotation)
Charging	Wireless (HomeComingDock™)
Warranty	3 years

What type of pool is the Aiper X1 Pro Max suitable for?

The Aiper X1 Pro Max works in in-ground and above-ground pools up to 300 m² (or 30 metres in length). It is compatible with concrete, fibreglass, vinyl, tile and mosaic finishes. It works in both fresh and salt water (up to 50,000 PPM salt) and supports up to 40 PPM chlorine. It adapts to rectangular, kidney-shaped, circular and irregular pools. It is not suitable for inflatable pools, spas or tanks with a depth below 50 cm.

 

Frequently asked questions about the Aiper X1 Pro Max

Does the Aiper X1 Pro Max work in saltwater pools?

Yes. The Aiper X1 Pro Max supports salinity up to 50,000 PPM sodium chloride and up to 40 PPM chlorine. It works in both fresh and saltwater pools without restrictions.

How long does the Aiper X1 Pro Max battery last?

Its 10,400 mAh battery lasts up to 5.5 hours (330 minutes) in Eco mode on the floor and up to 10 hours (600 minutes) in surface mode. A full charge on the wireless dock takes around 4 hours.

Does the Aiper X1 Pro Max clean walls and the waterline?

Yes. The Aiper X1 Pro Max offers 4-in-1 cleaning: floor, walls, waterline and surface. It has dedicated modes for each area, plus a Standard mode that covers everything automatically.

Do I need HydroComm Pro to use the Aiper X1 Pro Max?

No. The cleaner works autonomously using the physical buttons or the app before entering the water. HydroComm Pro is an optional accessory that enables real-time remote control while the cleaner is submerged.

How much does the Aiper X1 Pro Max weigh and how do I remove it from the pool?

It weighs around 15 kg dry. A retrieval hook is included in the box. The automatic recall function brings the cleaner up to the surface when the cycle ends or the battery is low. An optional caddy is also available for transport.

How many cleaning modes does the Aiper X1 Pro Max have?

It has 8 cleaning modes: 5 automatic (Floor, Walls, Waterline, Standard, Eco) and 3 manual (Max Power, Surface/Skim, Floor + Wall). Intelligent dirt detection adjusts the power automatically.

What size pool is the Aiper X1 Pro Max suitable for?

The Aiper X1 Pro Max covers pools up to 300 m² (3,230 sq.ft) or 30 metres in length. It is compatible with in-ground and above-ground pools in concrete, fibreglass, vinyl, tile and mosaic.

The Aiper X1 Pro Max combines cordless 4-in-1 cleaning, 8,500 GPH suction powered by 9 motors, navigation through 40 ultrasonic sensors with 3D mapping, ultra-fine 3 µm filtration with a 5-litre basket, wireless charging and 8 intelligent cleaning modes — all in a cordless robotic pool cleaner that covers pools up to 300 m², delivers up to 5.5 hours of runtime and comes with a 3-year warranty.